기본 콘텐츠로 건너뛰기

ComfyUI Errors Fixed: Custom Nodes, Missing Models, VRAM

Quick summary: Most ComfyUI failures come from four places: a broken or outdated custom node, a model file that is missing or from the wrong family, too little GPU memory, or an update that changed the code but not its dependencies. This guide gives you a fixed order to check them in, the exact error messages that point to each cause, and the fixes from ComfyUI's official documentation. If you would rather not maintain a local install at all, the last section compares running it yourself with Comfy Cloud's plans.

What's in this guide

  1. First, find out what actually failed
  2. Fix 1: rule out custom nodes (the most common cause)
  3. Fix 2: "Value not in list" and other model errors
  4. Fix 3: CUDA out of memory and very slow generations
  5. Fix 4: things that break right after an update
  6. Fix 5: startup, GPU and connection problems
  7. Local ComfyUI vs Comfy Cloud: what each option costs
  8. Editor's note, FAQ and related guides

First, find out what actually failed

ComfyUI is a node-based app: a workflow is a chain of loaders, encoders, samplers and save nodes, and any one of them can stop the run. When a run fails you normally get a "Prompt execution failed" dialog with a Show report button. Click it before you change anything. The report names the node that failed and the Python error behind it, and that one line usually tells you which of the sections below you need.

Two more places are worth knowing. The terminal or console window that runs ComfyUI prints the full error, including "Failed to import" lines for custom nodes at startup. And if you use Comfy Desktop, the app writes its own app.log, which you can open from Desktop Settings → Logs → Diagnostics → Open logs folder. For the ComfyUI process itself, Desktop shows the output in the instance's Manage panel under the Terminal tab.

A simple habit saves a lot of time: before you debug your own workflow, load one of the built-in template workflows and run it. If the template works, the problem is in your workflow or its models. If the template fails too, the problem is in the installation.

Fix 1: rule out custom nodes first

The ComfyUI team says plainly in its troubleshooting guide that most of the issue reports it receives turn out to be caused by custom nodes, not by ComfyUI itself. So the first test is always the same: start ComfyUI with every custom node switched off and see if the problem disappears.

How to start without custom nodes

  • Comfy Desktop: there is an option in the settings menu to start with custom nodes disabled.
  • Manual install (Windows, macOS, Linux): from the ComfyUI folder run python main.py --disable-all-custom-nodes.
  • Windows Portable: copy run_nvidia_gpu.bat (or run_cpu.bat), rename the copy, open it in Notepad, and add --disable-all-custom-nodes to the launch line, so it reads .\python_embeded\python.exe -s ComfyUI\main.py --disable-all-custom-nodes --windows-standalone-build. Double-click the copy to launch.

If the error is gone, a custom node is responsible. If it is still there, skip to the model, memory and update sections below.

Find the guilty node by halving

The official method is a binary search: enable half of your custom nodes, test, and keep halving whichever group contains the problem until one node is left. With 16 nodes that takes about four rounds instead of sixteen.

  1. Check frontend extensions first. Nodes that add their own interface code cause the most trouble after ComfyUI's frontend changes: blank screens, misaligned UI, missing image previews, or links between nodes that stop working. In ComfyUI's settings, open Extensions and disable all third-party extensions, then restart once. If the problem disappears, re-enable them half at a time. For these you only need to reload the page between tests, not restart the server.
  2. Then check regular nodes. If the frontend test changed nothing, the cause is more likely a Python dependency: "Failed to import" messages, nodes that still show as missing after installing them, or ComfyUI crashing at launch. A common cause is two node packs that require different versions of the same package, such as one pinning an exact torch version while another needs a newer one.
  3. Back up before moving folders. If you halve by hand, copy the whole custom_nodes folder somewhere safe first, then move half of the node folders into a temporary folder, restart, and test.
  4. Or let the CLI do it. If you have Comfy CLI installed, comfy-cli node bisect start runs the same search for you; mark each round with comfy-cli node bisect good or bad, and finish with comfy-cli node bisect reset.

Once you know the node, the options are, in order: update it from ComfyUI Manager, look for a replacement on the ComfyUI Registry, report it on the node's GitHub page with your ComfyUI version and the error, or remove it from custom_nodes.

Fix 2: "Value not in list" and other model errors

Missing model

This is the classic error when you open a workflow someone else shared:

Prompt outputs failed validation: CheckpointLoaderSimple: - Value not in list: ckpt_name: 'model-name.safetensors' not in []

It means the loader node is asking for a file that isn't in the folder it searches. Download the model (ComfyUI Manager can fetch many of them for you) and put it in the right subfolder: checkpoints go in models/checkpoints/, VAEs in models/vae/, LoRAs in models/loras/, ControlNets in models/controlnet/ and embeddings in models/embeddings/. If your models live somewhere else, for example in a folder shared with another app, point ComfyUI to it in extra_model_paths.yaml instead of copying gigabytes around.

Models from different families

Errors like "expected input[1, 16, 128, 128] to have 4 channels, but got 16 channels instead" or "mat1 and mat2 shapes cannot be multiplied" almost always mean you mixed model families. SD1.5 and SDXL work in a 4-channel latent space, while Flux and SD3 use 16 channels, so a Flux checkpoint decoded with an SDXL VAE fails at the VAE decode step. The same rule applies to ControlNets: SD1.5 ControlNets only work with SD1.5 checkpoints and SDXL ControlNets only with SDXL. For Flux, the docs also flag one specific mistake: loading the T5 encoder into both slots of the dual CLIP loader instead of T5 in one slot and clip_l in the other.

"Error while deserializing header"

This usually means the model file is damaged or incomplete. Download it again, make sure the drive has room (single models can take anywhere from about 2 GB to well over 15 GB), and check that ComfyUI has permission to read the folder.

Fix 3: CUDA out of memory and very slow generations

"RuntimeError: CUDA out of memory" means the workflow needs more video memory than your GPU has free. Work through these in order, testing after each one:

  1. Close other apps that use the GPU, such as games, video editors or a second ComfyUI window.
  2. Lower the resolution or the batch size.
  3. Launch with --lowvram. If that's not enough, try --novram. Use --cpu only as a last resort, because it is very slow.
  4. Try --force-fp16 or --use-pytorch-cross-attention to cut memory use further.
  5. If your desktop itself stutters, --reserve-vram 2 keeps about 2 GB free for the operating system.

On Portable you add these flags to the launch line in the .bat file, the same way as the custom node flag above; on a manual install you add them after python main.py. If models take ages to load each time you switch, the docs suggest moving them to an SSD and adjusting caching with options like --cache-lru 10.

Fix 4: things that break right after an update

A frequent pattern: you ran git pull, and now the new templates are missing, the interface looks old, or node help is out of date. The code updated but its dependencies did not. The fix is to run pip install -r requirements.txt inside the same Python environment that runs ComfyUI. A startup log line saying "Falling back to the default frontend" is the giveaway that the frontend package didn't update.

  • Portable: use update\update_comfyui.bat, which updates both code and dependencies. To update only dependencies, run .\python_embeded\python.exe -m pip install -r ComfyUI\requirements.txt from the portable folder.
  • Desktop: update the ComfyUI instance from Manage → Update and pick Stable or Latest on GitHub. The Desktop app itself updates separately. If a new feature you read about is missing, you are probably on Stable, which can lag behind GitHub.
  • Before you update Desktop: Comfy Desktop takes a snapshot automatically before and after updates, recording the ComfyUI version, custom nodes and pip packages. If an update goes wrong, restore the previous snapshot from the instance's Snapshots tab. Snapshots don't include model files or outputs.

Desktop users on Windows should know one specific bug: versions 1.0.46 and earlier can get stuck in a loop where the app shows an update screen and then closes on every launch. The fix is to download and run the latest Windows installer from comfy.org/download over the top; your installs, models and settings are kept.

Fix 5: startup, GPU and connection problems

  • "Torch not compiled with CUDA enabled" on an NVIDIA card: you have a CPU-only PyTorch. Uninstall torch and reinstall the CUDA build the docs list, then check with python -c "import torch; print(torch.cuda.is_available())". On an Intel GPU the same message means the XPU backend wasn't found, and the docs warn not to install a CUDA build there.
  • GPU not detected: update the graphics driver and check that nvidia-smi shows the card.
  • App won't open on macOS: go to System Settings → Privacy & Security and choose Open Anyway. On Linux, the AppImage needs FUSE 2 (libfuse2).
  • "Failed to connect to server": allow ComfyUI through the firewall, temporarily disable a VPN or proxy, or start on another port, since the default 8188 may be taken.
  • Wrong Python version: the system requirements page currently recommends Python 3.13, with 3.12 as a fallback when custom node dependencies misbehave.
  • Visual glitches in the browser: the docs recommend Chrome 143 or later; older versions have known display and performance issues with ComfyUI.

Local ComfyUI vs Comfy Cloud: what each option costs

If most of your time goes into fixing drivers and dependencies, it's worth knowing the alternative. ComfyUI itself is free and open source. Comfy Cloud is the official hosted version, with models and popular custom nodes pre-installed and billing only for active GPU time.

Option Price Hardware Limits and key features
Local ComfyUI (Desktop, Portable or manual) Free Your own GPU Any model or custom node, works offline; you handle installs, updates and node conflicts yourself
Comfy Cloud, free start $0 Cloud GPUs 5 free runs on real GPUs plus free Comfy Agent credits for new users
Comfy Cloud Standard $20/month, or $16/month billed yearly ($192) Blackwell RTX 6000 Pro, 96 GB VRAM 30-minute max per workflow run, 50,400 credits per year, top-ups available
Comfy Cloud Creator $35/month, or $28/month billed yearly ($336) Same Everything in Standard plus importing your own models and LoRAs; 88,800 credits per year
Comfy Cloud Pro $100/month, or $80/month billed yearly ($960) Same Runs up to 1 hour each, 253,200 credits per year

Prices are from the Comfy Cloud pricing page as of 2026-10-25 and may change. Credits are spent on GPU runtime and on Partner Nodes such as Nano Banana, and unused top-up credits roll over for up to a year. Idle time spent building a workflow isn't charged.

Editor's note

  • Who local ComfyUI is for: people with a recent GPU who want full control over models and custom nodes and don't mind reading a traceback now and then.
  • Who it's not for: anyone who needs a result today on a laptop without a dedicated GPU. The free Comfy Cloud runs or a simpler hosted image tool will be less frustrating.
  • Biggest gotcha: installing every interesting node pack you find. Each one adds Python dependencies, and conflicts between them are the top source of breakage. Install only what a workflow needs.
  • Common error → fix: "Value not in list" → model file missing or in the wrong models/ subfolder. "Expected 4 channels, got 16" → mixed Flux/SD3 and SD1.5/SDXL parts. "CUDA out of memory" → smaller image, then --lowvram. Missing features after git pull → pip install -r requirements.txt.
  • Before you ask for help: note your OS, ComfyUI version (shown on the About page in settings), Python and PyTorch versions, GPU and driver, install type, and the full error text. The official guide asks for exactly this.

FAQ

Why does ComfyUI say a node is missing after I installed it?

Usually its Python dependencies failed to install, so the node pack can't load. Look for a "Failed to import" line in the console at startup, then reinstall the pack's requirements or update it from ComfyUI Manager. If it still won't load, it may conflict with another pack, and the halving method above will find it.

Is there an official ComfyUI Docker image?

No. The ComfyUI team states it doesn't provide one. Community images exist on Docker Hub, but they aren't maintained or supported by Comfy Org. The official routes are Desktop, Portable for Windows, a manual install, or Comfy Cloud.

Do Comfy Cloud credits work in local ComfyUI?

For Partner Nodes, yes. The pricing page says the credits that come with a subscription can be used for Partner Nodes in both Comfy Cloud and local ComfyUI. Running open models on your own GPU doesn't use credits at all.

Related guides on Lightmind24

Check custom nodes first, models second, memory third, and most ComfyUI errors stop being mysterious.

Images: Comfy Cloud pricing page screenshot (captured 2026-10-25) and screenshots from ComfyUI's official documentation; see the official screenshots at the end of this post.

Last verified: 2026-10-25
Sources:
ComfyUI Docs: How to troubleshoot and solve ComfyUI issues
ComfyUI Docs: Troubleshooting custom node issues
ComfyUI Docs: Model issues
ComfyUI Docs: How to update ComfyUI
ComfyUI Docs: Comfy Desktop FAQ
ComfyUI Docs: System requirements
ComfyUI Docs: Comfy Cloud
Comfy Cloud pricing

Uploaded Image Uploaded Image Uploaded Image Uploaded Image

댓글

이 블로그의 인기 게시물

브루(Vrew) 요금제 정리: 무료 200크레딧으로 어디까지 쓸 수 있나

요약: 영상 자막 편집기 브루(Vrew)는 2026년 4월 22일부터 기능별 사용량 대신 '통합 크레딧' 하나로 요금을 매겨요. 무료 플랜은 매달 200크레딧이 들어오는데, 음성 분석(자동 자막)만 쓰면 최대 200분 분량이라 짧은 영상 몇 편은 충분하지만, 영상 초반의 Vrew 마크를 지우려면 유료 플랜이 필요해요. 이 글은 브루 공식 가격 페이지와 고객센터 공지를 2026년 10월 23일에 다시 확인해, 크레딧 계산법과 플랜 고르는 기준을 정리했어요. 목차 브루 요금 구조: 통합 크레딧이란 1크레딧으로 할 수 있는 일 무료 플랜으로 되는 것과 안 되는 것 유료 플랜 4종 비교표 월 구독·연 구독·기간 이용권, 무엇이 이득일까 상황별 추천: 학생·직장인·유튜버 크레딧이 모자랄 때: 사용 기록 지우개 업그레이드·환불 전에 알아둘 규칙 운영자 메모, 자주 묻는 질문 1. 브루 요금 구조: 통합 크레딧이란 예전 브루는 플랜마다 음성 분석 몇 분, AI 목소리 몇 자, 번역 몇 자처럼 기능별 한도를 따로 줬어요. 그런데 보이저엑스(브루 운영사)가 실제 이용 데이터를 보니 한두 가지 기능만 집중해서 쓰는 사람이 훨씬 많았다고 해요. 그래서 2026년 4월 22일 업데이트부터는 플랜마다 정해진 크레딧을 받고, 어떤 기능에 쓸지는 내가 정하는 방식으로 바뀌었어요. 플랜별 매달 지급량은 Free 200 · Light 2,000 · Standard 10,000 · Business 12,000크레딧 이에요. 공식 공지에 따르면 무료 사용자는 매달 1일에, 유료 사용자는 매월 결제일에 충전되고, 남은 크레딧은 다음 달로 넘어가지 않아요. 바뀐 뒤 무엇이 좋아졌나 공지에 나온 예시가 이해하기 쉬워요. Standard 플랜에서 AI 목소리만 쓰면 예전에는 최대 50만 자였지만, 지금은 1만 크레딧을 모두 AI 목소리에 몰아 쓸 수 있어 최대 100만 자가 돼요. 반대로 여러 기능을 골고루 쓰는 사람은 크레딧이 기능끼리 ...

에이닷 전화 vs 익시오: 통화 녹음·AI 요약, 내 통신사·폰에 맞는 앱 고르기

요약: 통화 녹음과 AI 요약을 쓰고 싶다면 먼저 내 통신사와 휴대폰 종류부터 확인해야 해요. LG유플러스 고객은 무료 앱 익시오, SKT 고객은 에이닷 전화가 가장 기능이 많고, 다른 통신사의 아이폰 사용자는 iOS에 들어 있는 기본 통화 녹음·전사 기능이 현실적인 선택이에요. 이 글은 2026-10-30에 SKT·LG유플러스·Apple 공식 페이지와 도움말을 직접 확인해 세 가지를 비교했어요. 왜 '앱 기능'보다 '내 조건'을 먼저 봐야 할까요 통화 요약 앱 비교 글을 보면 기능 목록부터 나열하는 경우가 많아요. 그런데 실제로 써 보려는 사람에게 가장 먼저 걸리는 건 기능이 아니라 이용 조건 이에요. 익시오는 LG유플러스 고객 전용이고, 에이닷 전화는 누구나 설치할 수 있지만 통역콜·baro 같은 기능은 SKT 고객에게만 열려 있어요. 아이폰은 운영체제 구조상 앱이 통화를 마음대로 녹음하기 어려워서, 통신사 앱이 안 되면 iOS 기본 기능에 기대야 해요. 그래서 이 글은 "어떤 앱이 제일 좋은가"보다 "내 통신사·내 폰에서 무엇을 쓸 수 있나" 순서로 정리했어요. 기능 차이는 그다음이에요. 한눈에 비교: 에이닷 전화 vs 익시오 vs 아이폰 기본 통화 녹음 구분 에이닷 전화 (SKT) 익시오 ixi-O (LG유플러스) 아이폰 기본 통화 녹음 (Apple) 누가 쓸 수 있나 통신사 구분 없이 앱 설치 가능. 단, 통역콜·baro·그룹통화 발신 등은 SKT 고객 전용 U+ 모바일 고객. 타 통신사, 만 14세 미만, 선불요금제 고객은 제한 (공식 사이트 FAQ상 알뜰폰 중 KB리브엠은 예외) 지원 국가·언어의 iPhone 사용자. 1명과 통화할 때만 녹음 가능 지원 OS·기기 Android 10 이상, iOS 16 이상 iOS 17 이상 iPhone 12 이상 / Android...

타입캐스트 vs 클로바더빙: 수익 나는 채널에 쓸 때 무료·유료 조건 비교

요약 타입캐스트와 클로바더빙은 둘 다 글만 입력하면 한국어 AI 목소리를 만들어 주는 서비스지만, 무료로 쓸 수 있는 범위가 꽤 다릅니다. 클로바더빙 무료는 매달 15,000자까지 쓸 수 있는 대신 수익이 생기는 채널에는 쓸 수 없고, 타입캐스트 무료는 처음에 주는 약 5분 분량의 다운로드로 끝나는 체험판에 가깝습니다. 광고 수익이 붙은 유튜브나 쇼핑몰 영상에 넣을 목소리라면 처음부터 유료 플랜 조건을 보고 고르는 편이 안전합니다. 왜 이 두 서비스를 같이 비교하나 쇼츠 내레이션, 수업 자료 더빙, 상품 소개 영상처럼 "내 목소리 대신 AI 목소리"가 필요할 때 한국 사용자들이 가장 많이 찾는 곳이 네오사피엔스의 타입캐스트 와 네이버의 클로바더빙 입니다. 기능 소개만 보면 비슷해 보이지만, 실제로 문제가 되는 건 음질보다 "이 목소리를 내 채널에 써도 되나" 입니다. 그래서 이 글은 기능 나열보다 무료 사용 범위, 출처 표기 의무, 유료 플랜 가격과 다운로드 한도를 중심으로 정리했습니다. 모든 수치는 2026년 10월 25일에 두 서비스의 공식 요금 페이지와 고객센터 도움말에서 직접 다시 확인한 내용입니다. 한눈에 보는 비교표 항목 타입캐스트 무료 타입캐스트 베이직 클로바더빙 Free 클로바더빙 Standard 월 요금 0원 9,900원 (연간 결제 시 10% 할인) 0원 19,900원 (네이버 클라우드 플랫폼에서 결제) 무료·포함 사용량 음성 생성·재생 무제한, 다운로드는 최초 3,000크레딧(약 5분) 1회 지급 월 30,000크레딧(약 60분) 월 15,000자, 다운로드 월 20회, 프로젝트 누적 5개 (매월 1일 갱신) 월 30,000자, 다운로드 월 40회, 프로젝트 누적 20개 쓸 수 있...